How to Take Apart a Bissell Proheat Carpet Cleaner

The Bissell ProHeat Carpet Cleaner effectively gives your carpet a deep clean and keeps it looking fresh. If you purchased your Bissell carpet cleaner a while ago, you might notice its effectiveness changes over time. The machine may become less powerful, and you’ll need to take the device apart to perform maintenance. The Bissell ProHeat Carpet Cleaner is an excellent machine that cleans and disinfects your carpet, reducing allergens, bacteria, and debris in your home.

Initially, the Bissell carpet cleaner may seem complicated to take apart. However, if you follow a series of steps, you can avoid paying expensive fees to a professional to repair and maintain your machine.

Fortunately, servicing your vacuum is easy with a few tools, preparation, and following a few steps.

The Importance of Disassembling and Cleaning Your Bissell Device

Why is it crucial to take apart your Bissell ProHeat Carpet Cleaner? You may notice some recurring issues after using your machine for a while. Some of these common concerns include the following:

• Overheating, which may be a sign of other device issues
• There is a build-up of debris in the machine, including dust, pet hair and other particles from your carpet and home.
• The machine becomes less effective and requires thorough cleaning and maintenance to improve its function.

In most cases, disassembling and cleaning your machine is an effective way to repair and improve your Bissell’s performance.

How to Prepare Your Machine

Before taking your Bissell apart, ensure the unit is turned off and unplugged. If your machine is warm to touch, especially after use, allow it to cool before disassembling it. These steps will prevent the risk of electric shock, which is essential before you remove the parts of the machine.

If there are any liquids inside the carpet cleaner, empty the water tank to prevent any spills while loosening each part of the machine. It’s essential to drain any cleaning liquid, even just dirty water. Once you prepare your machine, you’ll be ready to remove all parts with ease.

What You’ll Need to Remove the Parts of Your Bissell

There are a few items you’ll need to take your machine apart. You’ll likely have these tools in your home, or you can find them at a local hardware store:

• A Phillips head screwdriver (the tip of this screwdriver has an “X” shape)
• Needle-nose pliers

For most of the disassembling process, you’ll likely only need the screwdriver, though the pliers may be required if a piece becomes stuck or you require a solid grip to remove parts safely.

Step-By-Step Process to Disassemble Your Bissell ProHeat Carpet Cleaner

Once you have all the tools and your machine is ready to take apart, it’s time to get started on this process.

1. Ensure you have adequate space to place each part down as you remove them. You may want to find a sturdy table or clean surface covered with a cloth or plastic.
2. Keep your tools nearby, so you can use them immediately when you begin to disassemble the machine. You’ll want the needle nose pliers and Phillips head screwdriver handy when they’re needed.
3. The first part of the machine to remove is the top water tank, which is quickly done by pushing the latch. This step will also unlock the lower water tank.
4. Once the top water tank is removed, you’ll have access to the lower tank, which slips out quickly with little effort.
5. The hose attachment is the next item to remove by unwrapping it from the machine, then releasing the latch to loosen and remove it.
6. There’s a tool caddy on the back of your machine. Remove any accessories and small tools in this part of the carpet cleaner and ensure it’s empty.
7. When the tool caddy is empty, use the Phillips head screwdriver to remove the screws from the hose attachment rack until it’s loose enough to take off.
8. Use the same screwdriver to remove the front nozzle of the Bissell carpet cleaner. Place the carpet cleaner down and position the machine to set the power cord against the floor.
9. You’ll find black screws fastened to a clear cap, which must be loosened and removed. Once you take off this cap, you’ll find the pivoting arm and the silver screw.
10. Take off the silver screw, then remove the pivoting arm. Once these two items are separated from the machine, you’ll have access to the brush rolls and belt.

Now that the Bissell ProHeat Carpet Cleaner is completely disassembled, you’ll have complete access to the parts of the machine that need repair and maintenance. Before investigating your device for possible damage or repairs, wipe the parts thoroughly with a microfiber cloth and clear debris and dust. Review the brush roll for any build-up of dirt, which can impact the performance of your machine.

When you finish cleaning, inspecting and repairing your carpet cleaner, carefully place each part back together, starting with the most recently removed parts, until the Bissell is completely reassembled.

Then, plug in your machine and try the cleaner with the cleaning solution and water to ensure that it’s in good working condition. Check for any changes and leaks to ensure there are no further issues.

Bottom Line

You’ll find that disassembling your Bissell ProHeat Carpet Cleaner is accessible and helpful in assessing your machine for any recurring issues, debris, and embedded dirt. It’s a relatively simple process that will save you the cost of hiring a professional repair service and keeping your machine running smoothly and efficiently.